Couplers Singlemode Coupler The SMC series offers very low insertion loss, low polarization dependence and excellent environmental stability. Accurate coupling ratio from 50/50 to 1/99 are available with very good uniformity in a wide wavelength range from 445 – 2100 nm. These components find extensively applications to perform power splitting and monitoring functions in all…
Furcation Tubing
Singlemode series : Type of connector Standard diameter of the ferrule Typical Losses (dB) Advantages FC Φ2.5mm 0.25-0.5 High precision, vibration environment, suitable for terrain SC φ2.5mm 0.25-0.5 Integrity, reliability, speed of deployment, compatibility LC Φ1.25mm 0.25-0.5 High density, cost-effectiveness, adaptation to terrain FC Series The FC Connectors feature a threaded coupling nut system for…
Quality endfaces can be obtained by polishing or by cleaving. After stripping a cable, polishing is employed in connector terminations when the fiber is secured in a ferrule by epoxy. There are two types of fiber connectors: physical contact or expanded beam. See below our different services of connectorization: Fiber Stripping The outer sheath of…
Typical procedure A small section of the optical fiber’s buffer layer is stripped to expose the fiber. The fiber end is cleaved to produce a clean and perpendicular cut. The fiber is then fusion spliced to the second fiber end and the splice reinforced with a protection sleeve. The method of fusion splice provides much…
Fiber Optic Closure : It is a fiber enclosure that is either watertight or breathable, aimed at protecting optical fiber splices and connectors coming from different outside plant cables and offers a full protection to the optical fiber. From a construction standpoint, a fiber optic splice enclosure is composed of the enclosure shell ensuring weather…
Our cleavers are ultimate precision tools for single and multiple/massive fiber cleaving with a rotating blade. Several models are available: Self-pivotating rotary blade Cleaver The FC-R8 is a “single movement” cleaver which supports 250 µm and 900 µm fibers and can also work with ribbon fibers. It cleaves in a single pressure thus increasing the…
In partnership with Sumimoto, 3 different Splicers options are available: Core-to-core Alignement Fusion Splicer The T-72C+ splicer allows a heart-to-heart 3-axis alignment. It is equipped with 2 CMOS observation cameras for the X and Y axes and provides microscope magnification up to x760. Compact and lightweight with a double oven heat-up speed of 8s and…
Single-fiber assemblies
Single-fiber assemblies
